Skip to main content

AR-300 Radar Firmware v3.1.0

Release date: 2026-06-22

Improvements​

  • Multiple Channels: Phoenix can now operate on one of several pre-defined channels, in order to avoid mutual interferences. The channel can be selected in the "Radar" page on the dashboard (either the Radar dashboard or the APU dashboard).

    Select Channel

  • Radar Settings Persistence: All the Radar settings (channel, timing and transmitter state) are now stored persistently. The Radar will start using them as soon as it powers up.

  • Radar Settings UI redesigned: The UI is now more intuitive and better aligned with MASS and terminology across Magos systems.

  • Multiple Raw Data clients: The Radar can now serve multiple streams of raw data (limited by network bandwidth)

  • Time Sync Visibility Improvements: When clicking the "TEST NTP" button on the dashboard "Time" page, some additional information can be shown to help detecting NTP related problems. Additionally, the reliability of the time sync indicator on the status page has been improved.

    NTP Server Info

Bug fixes​

  • Dashboard version is now properly shown in the "Components" screen.
  • The Radar View in the Dashboard now automatically refreshes when the Radar gets disconnected.
  • The IP Address of the Radar can now be properly set from Radar Manager, and the firmware version it shows is now correct.
  • When powered on, the date and time of the Radar (until it syncs up with an NTP server) would be approximately those that where in effect before the power dropped. This fix help mitigating an issue with 802.1x certificate validity.
  • False system health related alerts have been eliminated.